Live site data encoding, multiple channel Full HD/SD encoding, support H.264/AAC encoding, support RTMP streaming to Flash server

Buy Now


VJEncoder2 Introduction


  • 1U Rack-mounted chassis design, can be on a standard rack.
  • High density coding, can support 4 Full HD or 6 SD signs.
  • Support H.264/AAC codec, up to 1080p
  • Each channel code is supported by the main and sub stream; bitrate coding parameters of the main and sub stream can be set independently, and support up to 1080p.
  • Graphic size and frame rate of encoding output can be adjusted; support the ‘deinterlace’
  • Automatic recognition of the video input signal format, no need manual settings.
  • Each main stream or sub stream is supported to push to 2 broadcast servers simultaneously.
  • Support RTMP protocol pushing to Flash server (FMS/Wowza/VJMS3).
  • H.264 support ABR/CBR/CQP mode, support baseline/-main/high specification,support 1.0-5.2 level,code bitrates range from 0kbps to 30mbps and support low delay coding.
  • AAC support MPEG2/MPEG4 version, support MAIN/LOW/SSR/LTP complexity, code bitrates range from 10kbps to 256kbps, support RAW/ADTS of the output format.
  • Gigabit network interface; support remote WEB management and reset to defaults.


  • Low power embedded design, easy to install and use, easy to maintain.
  • Support single channel HDMI/VGA/SDI coding.
  • Automatic recognition of the video input signal format, no need manual settings.
  • H.264 High Profile@ level 4.1 encoding, less than 50ms encoding delay.
  • Support adjustable coding rate and controllable frame quality
  • Support image enhancement and fault tolerance technology, strong error resilient capability, with the industry’s best image and sound performance.
  • AAC-LC high fidelity audio coding, support G.711 Audio Encoder.
  • 1 analog audio input /1 analog audio output, support two-way voice intercom function.
  • 1 RS-485 serial control interface, support PTZ control and remote control of remote decoder/PC .
  • Meet the standard of RTP/RTSP/RTMP/TS media transfer protocol, can be used with the majority of decode products and streaming media server in the market.
  • Provide 1.1/2.0 ONVIF standard management & control protocol, can be integrated automatically with the IP monitoring system.
  • Support Pelco-D /Pelco-P/Sony VISCA PTZ Control.
  • Web based interface, support online real time video preview
  • Support to reset to defaults.

VJEncoder2 Compare Table

Type NBM-400H NBM-400S NBM-600A NED-01H-HDMI NED-01H-SDI
chassis 1U Rack-mounted chassis design Embedded
Video format SD/HD SD/HD SD SD/HD SD/HD
Encoding channel 4 4 6 1 1
Video input 4 channels HDMI 4 channels SDI/HD-SDI 6 channels analog compound 1channel HDMI/VGA 1channel SDI/HD-SDI
Audio input 1channel 3.5mm MIC input
1channel 3.5mm line input
4 channels HDMI embedded audio input
1channel 3.5mm MIC input
1channel 3.5mm line input
6 channels RCA stereo audio input
1channel 3.5mm input
1channel HDMI embedded audio input
1channel 3.5mm input
1channel SDI embedded audio input
Audio output 1 channel 3.5mm output
Video coding H.264 Base/Main/High Profile Level 5.2; Bitrate:1Kbps~30Mbps H.264 High Profile Level 4.1; Bitrate: 512Kbps~30Mbps
Audio coding AAC Bitrate:10Kbps~256Kbps AAC-LC; Bitrate:64Kbps~256Kbps
Support input format 1080p and lower format 1080i/p 720p 480i 576i 480i/p 576i/p HDMI:HDMI 1.3/HDCP 1.3,1080i/p and below (max 60Hz)
Support deinterlace
Support output frame adjustment
Support RTMP Output
No. of single stream RTMP to push server 2 2 2 2 2
Support RTP/RTSP Output      
Support HTTP TS Output      
Support subcode flow
Coding minimum delay ≤50ms ≤50ms ≤50ms ≤50ms ≤50ms
Power supply 110V~240V/AC 110V~240V/AC 110V~240V/AC DC 12V, 1A DC 12V, 0.6A
Power consumption 250W 250W 250W 7W 6W
Internet access 10/100M/1000M self-adaption 10/100M/1000M self-adaption 10/100M/1000M self-adaption 10/100M self-adaption 10/100M self-adaption
Support to reset to defaults
WEB remote management